Print PDF
Favorite
Email
Step 9Coat the Kernel in PMC Paste!
Apply a thick layer of slip making sure to cover all areas of the kernel evenly.
Try not to jostle the bail wire. However, do make sure you paint a little PMC where the wires cross to ensure it attaches to the finished piece.
I used a #8 flat, golden nylon bristle brush. However, any inexpensive, synthetic bristle, artist's brush would do fine.
Try not to jostle the bail wire. However, do make sure you paint a little PMC where the wires cross to ensure it attaches to the finished piece.
I used a #8 flat, golden nylon bristle brush. However, any inexpensive, synthetic bristle, artist's brush would do fine.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
