Introduction: Fingerboard Simple Bank Ramp

Picture of Fingerboard Simple Bank Ramp

A simple ramp that you can make out of, for instance, an Easter egg box. All you need is scissors, Sellotape and a box.

Step 1: Cut Out

Picture of Cut Out

Get your box and cut the sides as shown.

Step 2: Sides

Picture of Sides

Cut out the parts as shown on the bottom base. Repeat on other side.

Step 3: Sides Part Two

Picture of Sides Part Two

With the pieces you just cut out, make a base for the side of the ramp. I suggest cutting a third one to go into the middle for extra strength.

Step 4: Attaching the Sides

Picture of Attaching the Sides

Tape them together like so to the base.

Step 5: Finishing

Picture of Finishing

Fold the top half of the ramp over and tape to the base and side supports.

Comments

About This Instructable

567views

0favorites

License:

Bio: I like Planes. Not much Else to say. I love to build things with anything I see in the house, whether it be Cardboard or ... More »
More by TheNerdyKid4:Fingerboard Simple Bank RampFingerboard Simple Fun Box
Add instructable to: