Print PDF
Favorite
Email
Step 2Shaping the wire
Make sure the wire is not on any areas of the garment that will receive a lot of friction or action, such as the seat or joints.
The wire cannot be bent at sharp angles, so your design needs to be based on curves and loops.
The smallest curve it affords is that of a pencil circumference.
For this design, I used small loops for the "points" of the flames.
see larger video
The wire cannot be bent at sharp angles, so your design needs to be based on curves and loops.
The smallest curve it affords is that of a pencil circumference.
For this design, I used small loops for the "points" of the flames.
see larger video
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
