With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
This is a great little project to add some color and beauty to an outdoor space.
1. To begin you will need some materials. Pictured from top left: Speaker wire, Fishing line, Electrical tape, Feathers, 3v batteries, 3v LEDs. Not ...
2. Bend the negative (short) lead on an LED back as shown
3. Attach the long (positive) lead to the positive side of one of the batteries. Cut a three foot length of fishing line, and secure both to the posi...
4. Cut two feet of speaker wire, strip it, and get one strand. Coil the strand a few times around the handle of your pliers. Make sure to leave some...
5. Insert the other end of the wire into the feather, and secure with a drop of super glue.
6. Attach the coil side of the wire to the negative side of the battery, and be sure that the negative lead on the LED is inside the coil
7. Make any final adjustments to be sure the coil will hit the lead and place in a location of your choosing. As the wind blows the feathers will mov...
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »