Picture of How To Make A First Person Camera Mount This is for devices that don't have threads. Built in such as phones not responsible for broken devices please subscribe to my channel
Remove these adsRemove these ads by Signing Up

Step 1: Matirials

Picture of  Matirials
13, 9:34 PM.jpg
13, 9:34 PM.jpg
13, 9:34 PM.jpg
13, 9:34 PM.jpg
13, 9:34 PM.jpg
These matirials are easy to find most homes are likely to have them. Now the mobile holder is the one you might not have find it online cheap on amazon but chances are you might not get a good quality one I ordered 2 from same vender only one of them I trust to hold an expensive ipod so do this at ur own risk I won't be responsible for broken cams phone ETC.

Step 2: Making The Hole

Picture of Making The Hole
Grab your xacto knife and cut a hole now take your scissors and carefully twist it in the hole just smaller then the bolt that is being used

Step 3: Add Bolt

Picture of Add Bolt
Take your bolt and insert it through the hole that was just made then screw in the nut.

Step 4: Secure Bolt

Picture of Secure Bolt
Securely tighten the bolt with a nut this will keep it from moving around or keep it from poping out

Step 5: Thread In Adapter

Picture of Thread In Adapter
Thread in your mobile holder tighten it smoothly but don't over do it

Step 6: Your Done

Picture of Your Done
Now add your phone or ipod and your done