Step 6:
OK! Last bend!
Use the mark you made (the low point where your keys will hang from) and set the last bend as far as you can on the brake. Now you have a nice 'Z' shaped sculpture.
Take this over to the vice and clamp down that last bend... fini!
Use the mark you made (the low point where your keys will hang from) and set the last bend as far as you can on the brake. Now you have a nice 'Z' shaped sculpture.
Take this over to the vice and clamp down that last bend... fini!
Remove these ads by
Signing UpFlag this comment as:
Not NiceInappropriateSpam
Visit Our Store »
Go Pro Today »
