Introduction: Fishtail Bracelet #2
Step 1: Supplies
You will need:
3 colors of bands (for this tutorial)
C or s clip (does NOT matter)
Step 2: Pens
Now get your 2 pens and the first color.
Step 3: Figure 8
You will always start the fishtail bracelet off with a figure 8 like the picture above shows.
Step 4: Second Band
Now simply layer the PINK band (the figure 8) with a clear one. (Do not make it a figure 8!!!!!!)
Step 5: 3rd Band
Now you should have 2 bands. If not, go back to step 4. Put a third band over the 2 bands.
Step 6: Pulling It Over
Now pull the pink band or whatever your bottom color is OVER the tops of your pens one at a time.
Step 7: Putting a New Color On
Now you might be wondering, what color next?? Just look at the color in the middle so we will be putting a pink on.
Step 8: Keep the Process
Now whenever you have 3 bands, make sure to pull the bottom one over and keep going......
Step 9: Progress
After maybe 6 miniatures mine started to look like this.
Step 10: S or C Clip
Now you will simply connect the s or c clip to the top then the bottom.
Step 11: Final Product
We have a be nice policy.
Please be positive and constructive.