Print PDF
Favorite
Email
Step 2Let's Get Started:
Cut a piece of duct tape and hold the cartridge closed together and place the tape down. keep repeating this until the hole/gap has become drastically much better.
This picture shows the back side of the cartridge. The tape is on the TOP (but NOT touching the label, don't do that...unless you don't care about messing up the label) and the SIDES.
This picture shows the back side of the cartridge. The tape is on the TOP (but NOT touching the label, don't do that...unless you don't care about messing up the label) and the SIDES.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
