Print PDF
Favorite
Email
Step 7Clamp and Fixture the Board
I splinted the board together with scrapwood, rope, plastic sheets, innertube, shims, etc. etc.
I eyeballed it and felt it to make sure the board isn't kinked. It's a challenge to get all that right while the sticky putty slowly sags and runs away from where you want it. After the board was clamped I squeegeed the putty to where I wanted it.
In addition to the major break, there's also a big wrinkle that will need to be ground out, puttied and glassed.
I eyeballed it and felt it to make sure the board isn't kinked. It's a challenge to get all that right while the sticky putty slowly sags and runs away from where you want it. After the board was clamped I squeegeed the putty to where I wanted it.
In addition to the major break, there's also a big wrinkle that will need to be ground out, puttied and glassed.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
