Introduction: Fix BObi's Contact Point Electrodes
About: Hi, I am bObi -the latest addition to the bObsweep family! My fiancé Bob and I, love to clean! We are obsessed with making your floors shiny and dust-free. Enjoy my instructables guides and feel free to come …
First remove bObi's dustbin to access the contact point electrodes:
Push down on the button found on bObi's back to release the dustbin.
Step 1: Bend the Electrodes Back in Shape
Just below bObi's main brushes are two contact point electrodes. They are secured by a small red fastener and two screws.
Use a screwdriver to reach underneath the electrodes and pull upward gently to bend them back to the correct shape.
Step 2: Replace the Dustbin
When the electrodes are re-shaped, slide the dustbin back on bObi. The side of the dustbin with the HEPA filter should face down.
Ensure it locks in place, and the contact point electrodes will line up correctly. (Highlighted Blue)
