Instructables

Easy Fix for Horizontal iPhone Pocket Syndrome

Featured
Picture of Easy Fix for Horizontal iPhone Pocket Syndrome
P1050704.JPG
According to a very scientific poll at everythingicafe, 41% of people put their iPhone in their right front pocket and 34% in their left front pocket. (http://www.everythingicafe.com/forum/threads/which-pocket-do-you-put-your-iphone-in.57830/).

I'm a right-front-pocket type but I hate it when my iPhone slips down to the bottom of my pocket and sits horizontally across my leg and it's worse (all bunched up) when I sit down.

I know, it's not the end of the world, but I decided to do something about it.
 
Remove these adsRemove these ads by Signing Up

Step 1: Where the iPhone wants to go

Picture of Where the iPhone wants to go
Here's the shape of the front pocket and it is no surprise that the iPhone wants to slide down to the bottom.

Step 2: Where I want the iPhone to go

Picture of Where I want the iPhone to go
I'd like the iPhone to sit next to the side seam and you can see the pencil lines I've drawn in my plan to split the bottom of the pocket and square off the bottom of the "iPhone" side.  I want to make the divider just over halfway up the iPhone (to the bottom of the Apple logo).  That should be enough to keep it vertical and still make it easy to get the phone in and out of the pocket.

Step 3: All Sewn Up

Picture of All Sewn Up
P1050724.JPG
That took about 2 minutes and you can see I went a bit bigger than my pencil lines to be safe and in the next photo you can see how the divider looks inside the pocket.

Step 4: That works for me...

Picture of That works for me...
P1050732.JPG
So when standing up, the iPhone is hard to see and it is much more comfortable when sitting down.  Also if your sewing machine is set up, it will probably take you less time to do this than it took to load and read this instructable.

Please comment and rate.

Step 5: Variations on a Pocket Theme

I started through my wardrobe and found that pocket shapes vary quite a bit.  Here are some pics of various pocket shapes and where I put in the dividers.

I also discovered a secret iPhone pocket in a pair of Carhartt dungarees, but that's another Instructable...

If you put photos of your iPhone pockets or before/after shots in the comments below, I'll post them here.
1-40 of 68Next »
namrepusmt2 months ago
i didnt think that before, i'll try that..
stevenj598667 months ago

i think this will work for most phones

Javin0072 years ago
iPants.
Knight272 years ago
Cover your rivets with sugru?
tewharau (author)  Knight272 years ago
I've done this to most of my jeans now and some shorts as well. So far, the stitching alone has been fine. If you wanted to reinforce it, I'd probably use a bit of fabric before I got out the rivets...

I guess the two rivets on the watch pocket could scratch it when you put it in or take it out. If you were worried, you could do the mod in your left pocket (no watch pocket on that side).
klaurson3 years ago
Awesome, so simple, so smart. The perfect instructable, makes you think: why haven't I thought of that before!?
p2man3 years ago
I might try this, thanks!
Great, simple Instructable. I always use my left pocket for my phone because I'm deaf in my right ear. I keep the same stuff in my pocket beside my phone to keep in propped upright. Such as a small pill case, a dental brush and eyeglass cleaning rag. But it still drops occasionally. Sewing a seam down the middle makes the pocket useless for anything else you might want to put in your pocket, even your hand to get something else in your pocket.
Perhaps a pocket in your pocket, or a thin velcro strip sewn, or stuck down the middle would be even better.
What I hate the most is when you are driving and you can't get to it because its in your pocket with your seat belt over that. Perhaps a pocket sewn mid thigh to the side would work even better. Let us know how that goes?
tewharau (author)  GadgetmanKen3 years ago
Good ideas. Have a go & post pics!

You'd be surprised how short a seam is necessary to keep the phone upright. I reckon an inch might do it, which would make the rest of the pocket usable for all but those with severely webbed digits.
agdollison3 years ago
I wonder if Steve Jobs has seen this yet
Only thing I would change is stitching the whole thing. A small stitch at the top and maybe the bottom would stabilize the phone while leaving your pocket open when empty.
If so you can be on the lookout for the iPocket.. in fact, I vote for the title of this instructable to be changed to "The iPocket"

P.S. I have a blackberry
tewharau (author)  agdollison3 years ago
Hey, I didn't realize it until your comment, but in the second photo, i'm actually wearing a Steve Jobs costume!
MyMenagerie3 years ago
This is a fantastic idea! Thanks! I can also make pockets for other things that need to be carried away from all the normal pocket stuff. Thanks again!
Kaelessin3 years ago
This is brilliant! It's one of those things that's so simple and obvious even the shrewdest of us can't think of it :D

I carry quite a lot in my pockets and am rather annoyed when all the articles bunch up at the bottom (quite unsightly and uncomfortable) this should fix the issue nicely!
tewharau (author)  Kaelessin3 years ago
Thanks for the comment. I hadn't thought of it, but you could use the other side of the pocket for something else...earphones? sync cable? credit card?
Money... though I doubt very many of us have any. :(
pocket knife!
Or even a nice, thin, led flashlight. ;o)
the_kcar3 years ago
I've done similar mods, but to BDU pants. I don't carry a pockebook - I have one-hand-access to anything a purse or bag would normally carry. My cell, though, goes on a belt holster. Still - great 'ible!
im37333 years ago
I'd better not try this... I'd endup making a little pocket for everything and the result would be a pocket protector built into my jeans...
whiteoakart3 years ago
ooh ooh, Leatherman pouch sewn into pocket coming soon to all my pants. Thanks for the simply awesomely simple idea. I have a nerdy holster for my iPhone. But the leatherman, that thing drives me crazy.
Electorials3 years ago
it funny that you made an instructable for this haha
Great!
tewharau (author)  Electorials3 years ago
Tell me about it. You never know what people will like.

I posted two instructables yesterday.

This one took a half hour to do from start to finish. The other one took half a day to make and an hour to write up.

Today, this one has 4,000 views and the other one only has 400.
Thats because your instructable was featured on Lifehacker. Congrats!

http://lifehacker.com/5808149/force-your-phone-to-stay-vertical-in-your-pant-pocket
tewharau (author)  hiphopsuperman3 years ago
Thanks for that. Wow! Lifehacker! that's awesome!

I feel like a soap opera actor that just won a daytime emmy award.

I'd like to say to everyone here. You may have just witnessed the peak of my digital life. Now I can settle in for the long ride to internet obscurity.
You may be on top now but try and avoid the temptation of drug abuse and loose women. They dont really love you, they just love your instructable.
Tell me about it... I learned the hard way
That's a pretty lousy acceptance speech. You're supposed to get misty eyed and thank everyone in your life, including your 6th grade teacher that inspired you to DIY. :D

This is a great instructable because it's easy and solves a very common minor irritation. And you Kept It Simple S____d!
KD5NRH3 years ago
I did this with a cargo pocket to keep my flashlight vertical. What I keep meaning to do is make some sort of stiff insert fitted to the pocket with pouches sized for the flashlight, spare pistol mag, and digital recorder so I can move it all from one pair of cargo pants to another.
Twopercent3 years ago
Omagawd, just did this. Thanks for turning my left hip-pocket into a usable pocket again instead of a phone-only pocket :D
tewharau (author)  Twopercent3 years ago
Photos?
BtheBike3 years ago
Congressman Weiner could have used this 1. =)
tewharau (author)  BtheBike3 years ago
How exactly?
a simple downward stitch to hogtie (pun intent 100% :) the hog down maybe .
dokcal3 years ago
Brilliant! I think you might want to bar-tack the top end of the vertical stitching, though, just for strength. I'd imagine that will get a lot of wear and tear.

Might even be worth sticking a rivet there!
Oooh, no, a rivet could scratch the phone.
Well... maybe, eventually.

Both ends of the rivet would be on the outside of the fabric, and the phone would be on the inside. The only way it would scratch the phone would be if the edge of the rivet wore through the fabric... which, granted, it might do after prolonged use.

Eh, probably not worth the risk, though. I formally retract the notion of a rivet! ;>)
jmartin83 years ago
Wouldn't it be simpler to sew a line from the bottom of the pocket up to the watch pocket and then use a seam ripper to remove the stitches from the bottom of the watch pocket, thereby creating an otherwise mostly unused piece of you britches into something useful?
swmech jmartin83 years ago
Watch pockets are for challenge coins that you don't want to get scratched up by putting 'em in with your other change. This 'ible is one that I've done before as well, but I usually also make a horizontal stitch because I *really* hate pockets that go all the way down to mid-thigh.

Brava, thank you. :)
1-40 of 68Next »