Fix the earpiece of your Motorola V551 phone.

Step 6 The secret ingredient

Now take a few strips of electrical tape and layer them up. Two layers was thick enough for my phone. Cut out a small chunk of the layered tape and position it on the back side of the flexible circuit board, above where the pads are located (see picture).

Comments

[schmag]

I also used 3 pieces to be on the safe side. Worked like a charm. Thank you "wdautrem"! Much appreciated.

[bcool]

I used three pieces to be on the safe side (and to keep from having to take everything apart again if only 2 didn't work).