Print PDF
Favorite
Email
Step 2Position and Screw...
1. Position the cut belt inside the belt buckle as shown in the picture.
2. Put the screws back into the buckle and tighten them. They'll cut the new holes into the belt.
3. Put the belt on and give yourself a pat on the back. You just saved some money.
2. Put the screws back into the buckle and tighten them. They'll cut the new holes into the belt.
3. Put the belt on and give yourself a pat on the back. You just saved some money.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
