Print PDF
Favorite
Email
Step 9New and Old Couplings
If the motor coupling is the culprit, you'll notice some telltale signs once you remove it from the motor and transmission axles. It may be missing gear teeth, or the oblong hole that holds the motor axle might be so worn away that it can no longer grip.
Here are the two assemblies- the old worn one at top and the new one below. New assemblies will run you around $15 from an appliance parts shop, $50 from the repair man. This is a very common problem and most parts stores will have them on hand. If you're not in a hurry and are intimidated by appliance parts stores, check Ebay.
Here are the two assemblies- the old worn one at top and the new one below. New assemblies will run you around $15 from an appliance parts shop, $50 from the repair man. This is a very common problem and most parts stores will have them on hand. If you're not in a hurry and are intimidated by appliance parts stores, check Ebay.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
