Introduction: Flashlight

I wanted a tiny flashlight so i made one.

Step 1: Parts

1.Led soldered with wires

2.M&M's tube

3.Wires

4.Tape

5.(Optional) Switch

6.Sharp tool for making hole

7.CR2025 coin battery

Step 2: Tools

1.Cutter

2.Solder

3.Solder iron

Step 3: Process

Make a hole in the cap and fit the led in the cap,tape the cell with wires and connect it with led.At last put every thing in the tube and close it with cap.And you have a small ,simple led flashlight.

Comments

author
seamster (author)2016-07-21

Nice! This looks like a great little flashlight :)

author
mshakil1 (author)seamster2016-07-21

Thanks

About This Instructable

313views

4favorites

License:

Bio: I am a self called scientist. I like to invent new and different things.And also make life a bit easier.
More by mshakil1:Portable Smartphone ChargerFlashlight
Add instructable to: