With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
If you have read my other business card instructables, you will know what this is all about - make a business card that is useful, or that people real...
One CR2032 battery (I got them for about 16 cents on ebay when I bought 100)Two blank PVC ID cards (Again, I got these for about 16 cents - find a spe...
Cut a couple of strips of copper tape about 1/4 inch wide and 2 1/2 inches long. Solder one end of the LED to one of the copper strips, starting about...
One of the leads of the LED will be longer than the other - this will connect to the positive of the battery. Peel off the backing of the copper strip...
Apply some self adhesive foam tape around the perimeter of the card, and also around the battery to stop it moving. Make sure that the unattached copp...
Design the layout of your card on the computer, and print out - I just printed on plain paper and then laminated it. You might will want the image to ...
If you are making a few of these, you can ditch the double sided tape and use foam sheeting, attached with self adhesive spray. By using one of the bl...
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »