With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
share what you made with text, photos, video, and files
gather your favorite instructables together
In this project, you will make a flashlight that works without batteries. Even more amazing, you can recharge it in three minutes and it will run for...
First, solder a wire from the (+) on one capacitor to the (-) on the other capacitor.
Solder a 4-inch length of red wire to the unused (+) terminal on the capacitor. You will call this capacitor wire (+).
Solder a 2-inch length of black wire to the unused (-) terminal on the capacitor. You will call this capacitor wire (-).
Next cut the 1/8-inch plastic sheet for the flashlight case. Generally, this is accomplished by scoring the plastic, then breaking it along scored li...
Using the scoring edge (not the knife tip) pull the knife along the fine line several times until you create a groove. The plastic can now be snapped ...
Now you're ready to build your flashlight case. First, cut out three 1 1/4 x 7 inch pieces of plastic and glue them together with epoxy. This is the ...
Cut a plastic piece 1 1/4 inches by 1 1/2 inches. Drill a 1/4-inch hole and insert the 1/4-inch jack. Hold the jack with one hand (to prevent it from ...
Solder a 2-inch-long black wire to the end of the jack near the tab. Solder a 3-inch-long red wire to the other side of the jack (away from the tab).
Solder the red wire from the jack to the capacitor (+). Solder the black wire from the jack to capacitor (-). These wires form the path that wil...
Cut a piece of plastic, 1 x 1 1/4 inches. Drill two 1/16-inch holes in the center, side by side, the same distance apart as the leads on the LED. Cut ...
Remove the paper backing from the tape and fasten the tape to the plastic. This is part of the reflector for the flashlight. Insert the LED leads thro...
Cut a piece of plastic 7 inches by 1 1/4 inches. Drill a 3/4 inch hole 2 1/4 inches from the end. This is the plastic switch holder. Press the on/off...
Solder one end of a 6-inch length of black wire to one end of the capacitor (-). Solder the other end to the on/off switch.
Solder the wire from capacitor (+) to the long lead of the LED.
Cut a 2-inch length of red wire. Solder one end to the short lead on the LED. Solder the other end to the on/off switch.
When the switch is on, power will flow from capacitor (+) through the LED, through the switch, back to capacitor (-). This will cause the LED to light...
Cut a 1 by 3/4 inch piece of plastic. Insert it into the flashlight body, between the jack and the capacitor. This will prevent the capacitor from sli...
Place electrical tape over the on/off switch wires.
Glue the LED holder into the flashlight body.
Place metallic tape inside the flashlight body and on the plastic switch holder to form the reflector.
Glue the plastic switch holder to the flashlight body. Cut a 1 1/2 x 1 1/4 inch piece of plastic for the lens. Glue the lens in front of the LED.
Plug a 3-volt DC power supply, (+) tip, into the back for three minutes. Remove the power supply and enjoy your new flashlight.
We have a be nice comment policy. Please be positive and constructive.
The EXTREMELY EASY VERSION of the Super Capacitor Flash lightby EngineeringShock
2600 Farad Capacitor Flashlightby luxstar
Make your own Super Capacitor Flashlightby EngineeringShock
400 Farad Super Capacitor Flashlight. Build This One. It's Easy.by luxstar
How to charge a super capacitor using a hand crank dynamoby EngineeringShock
make a small working capacitorby argha halder
Build a Thermal Flashlight - Light Painting with Temperatureby maxjus
MAKE A FLASHLIGHT THAT DOESN'T NEED REPLACEMENT BULBS OR BATTERIES!by The King of Random
Enhanced Ljusa Chargerby jgahan
Let's learn about Super Capacitors! (A Practical Guide To Super Capacitors)by EngineeringShock
Download our new apps for iOS, Android and Windows 8!
© 2014 Autodesk, Inc.
By clicking "Create Account" you are indicating that you have read and agree to the Terms of service.
Already a member? Login »
Enter the email associated with your account and we will send you your username and a temporary password.
Not a member? Sign Up »