Introduction: Flask Making for Sand Casting Aluminum & Other Metals


In order to do Sand Casting one needs a proper "Flask" to contain the sand mold so you can pour your metal. This instructable shows you exactly how I make mine and they work great. Please watch the entire video to see how mine are constructed and you can make your own version at home using the tools you have on hand. Wood, wood glue, some screws and you are off and running. A hand saw will work fine but a table saw will make ya a nicer Flask in my opinion!

If you have any questions about the process feel free to ask. Watch the video for all the steps involved in bringing the project to completion. Please be sure and check out all my metal casting instructables I have posted. Thanks for Watching!


TheThinker (author)2016-07-05

This is an interesting topic. I would like to learn more about it. Unfortunately the videos ldo not work in the instructables mobile application. Can you include a direct link to your videos?

>"Unfortunately the videos do not work in the instructables mobile application"

Thats disappointing :(

Being new to the site I am not sure if it is against the rules to post the direct link to my YTube page but you can check my website included in my profile and I am sure you can find it from there with no trouble at all :)

About This Instructable




Bio: MSFN is "Makin Sumthin from Nuthin", I suggest you do the same! Basically I take inventory of what I have laying around that most likely ... More »
More by Makin Sumthin From Nuthin:Aluminum Casting-Making Custom Wheel Center CapsThe $5.00 PAINT CAN ALUMINUM FOUNDRY FURNACEHow to Do Aluminum Casting Using Green Sand-Virgin of Guadalupe
Add instructable to: