Introduction: Flat Pack Tablet Stand

Picture of Flat Pack Tablet Stand

Today I will show you how to make a flat pack tablet stand. It is easily disassembled and stored. When it is apart, it's only 3/8" thick so it can be stored in small places easily. All you need is some 3/8" thick wood and some basic tools.

Step 1: Making the Side Pieces

Picture of Making the Side Pieces

Cut 2 pieces of wood and draw the shape in picture 2 on one of them. Nail them together so when you cut them out they are identical. Use a drum sander and a disk sander to smooth the edges. File the inside of the slot to make it at least 3/8" wide so the back will fit.

Step 2: Making the Back

Picture of Making the Back

Cut a piece of wood that is about the size of your tablet. Mark a dado 1/2" in from each side that is 3/8" wide and 7/8" long. Cut them out and make sure the they will fit when you put the stand together. If you want, you can round off the top to give it a nice look. The stand should fit together now.

Step 3: Finishing

Picture of Finishing

This is by far the easiest step. Just pick you favorite finish and have fun.

Step 4: Done!

Picture of Done!

Great! Now you have a nice tablet stand that can be disassembled and stored easily.
P.S. Please vote for me in the flat pack contest :)

Comments

fhuaylla (author)2017-06-11

molde? o planos.

gracias.

Venturix (author)2016-10-11

Bellissima a idea, altrettanto bella la realizzazione pratica. Complimenti

ibeaniworld (author)2016-05-09

Love it, great job! :) If you don't fancy making one check out our stands at ibeani.co.uk - we think you'll love them ;)

ibeaniworld (author)2016-05-09

Love it, great job! :) If you don't fancy making one check out our stands at ibeani.co.uk - we think you'll love them ;)

About This Instructable

2,100views

73favorites

License:

More by isaylor:Flat Pack Tablet Stand2x4 End TableStriped Wood Pencil Box
Add instructable to: