Introduction: Flat Packed Desk Microphone
Here's an instructable on how to make my Flat Pack Desk Microphone.
Step 1: You're Going to Need These Items.
➡️1 Polystyrene plate 200x200 mm
➡️Black "gewebeband" (tessa)
➡️A microphone similar to the Trust Desk Microphone (or better)
Step 2: Strip the Microphone Until Only the Cable and the Diaphragm Remain.
Step 3: Download the PDF File.
Step 4: Use the File to Lasercut the Shapes Out of the 2 Mm Poly Styrene Plate.
Step 5: Attach the Loose Parts From the First Shape Together With the Black Tape.
Step 6: Plug the Diaphragm Into the Hole, It Should Be a Tight Fit. Don't Forget to Seal It With Some Black Tape!
Step 7: Your Flat Packed Desk Microphone Is Ready!
We have a be nice policy.
Please be positive and constructive.