Introduction: Flie-Ing GOOse Single Shot KNEX Rifle, High Power and Extreme Accuarcy

Picture of Flie-Ing GOOse Single Shot KNEX Rifle, High Power and Extreme Accuarcy

these day its guns wit h hoppers, however none of them r powerfull, this is single shot, more powerfull than killerks gun and has accuracy of a sniper, it the POWER GOOSE. TY KILLER K THE BARRLE IS BASED ON YOURS

u need:
CLIPS
35 GREEN CONECTERS
6 LIGHT GRAY CONECTERS
2 BLUE CONECTERS
3 ORANGE CONECTER
24 RED CONECTERS
1 WHITE CONECTER
2 CLIPS THAT ARE LIKE A y
2 BlACK HINGES
2 DARK GRAY CONECTERS
1 TAN CLIP
3 BALL JOINT CONECTERS

RODS
4 RED RODS
3 RIGID BLACK RODS OR GRAYS
10 YELLOWS
2 WHITES

Step 1: FIRING PIN ( U NEED 2 SUPER GLUE THIS TOGETHER)

Picture of FIRING PIN ( U NEED 2 SUPER GLUE THIS TOGETHER)

CONSTRUCT

Step 2: HANDLES

Picture of HANDLES

MAKE THIS

Step 3: BARREL

Picture of BARREL

THE NOTES WILL HELP IM NOT TAKING APART COS ITS QUITE A SIMPLE BARREL

Step 4: SCOPE

Picture of SCOPE

SIMPLE

Step 5: ACCURACY PART

Picture of ACCURACY PART

THIS KEEPS THE POWER BUT IS WHT MAKES T ACCURATE

Step 6: PUTTING ALL TOGETHER

Picture of PUTTING ALL TOGETHER

JUST LOOK AT PIC LOL

Step 7: BANDS

Picture of BANDS

FOR THE FIRING PIN I USE THREE OF THESE BELOW AND THEN 1 LITTLE 1 FOR THE TRIGGER.

Step 8: LOAD AN FIRE

PULL BACK PIN PUT YELLOW ROD IN SO IT CLIPS IN AND PULL TRIGGER.

Step 9: MOD

Picture of MOD

THIS GUN IS GOOD WITH A STRAP.

Comments

xadevox (author)2009-07-13

I ain't super gluin none of my pieces!

Dashadower (author)xadevox2012-06-23

I agree

Annix15 (author)xadevox2011-12-06

i agree with you TOTALLY

jimopertrat (author)xadevox2011-05-25

i agree!

KnexFreek (author)xadevox2009-10-03

i would only superglue for my shotgun check it out

ol987986 (author)KnexFreek2009-10-12

i didnt superglue i covered it in duct tape and it worked fine.

KnexFreek (author)ol9879862009-10-12

 oh

ol987986 (author)KnexFreek2009-10-21

i mean the flieing goose rifle

KnexFreek (author)ol9879862009-10-21

 oh

miniclipper (author)2010-07-29

dude you just modded a stupid knex hand gun i wold hae modded a good one, made my own gun or changing the sise of a bigger version and it was awesome seriously also you dont need to super glue i'm with xadevox.

rofl495 (author)miniclipper2010-07-30

you do realize this was posted in 2007.

captianchase (author)2007-06-02

not offense but this is only due to u hating on other guns here it goes, THIS IS JUST A POWERFUL, MUZZLE LOADING, BLOCK TRIGGER, KILLERK COPY, now how does that make u feel? not to good i presume (i dont have a problem with the gun, i think its cool but u need to be more tolerant)

it makes me feel that your a low life geak, ur probaly a adult or somet, im 10, knex is CHILDS TOY

ol987986 (author)Flie-Ing GOOse2009-10-19

thats why im a child
:D

15, it was a joke read my response to theKNEXfolo (its two comments down)

cobra (author)captianchase2008-02-07

I think knex is for everyone, it's such an awesome toy.

theKNEXfolo (author)captianchase2007-10-22

HOLY CRAP GETALIFE DONT SAY NEGATIVE STUFF ABOUT GUNS!!!!!WHAT DO U FEED ON... HAVING NEGATIVE COMMENTS???u know im just wondering thats all...

captianchase (author)theKNEXfolo2007-10-24

im parodying his negative comments, are you dumb? (i say right in the comment that its cool, learn to read the WHOLE commetn before repling to it, otherwise you look llike and idiot)

go home

Abominatus (author)2008-01-22

SEMI AUTO ARNT POWERFULL?!
HAH LOOK AT THIS!! https://www.instructables.com/id/GORKEM_S-KNEX-SNIPER-RIFLE/

that isn't semi auto, it just has a hopper, semi auto is when each time you pull the trigger the gun shoots, whith gorkems you have to pull the ram back each time. get youre facts straight b4

POST A LINK TO A SEMI AUTO KNEX WEAPON THAT U MADE THATS BAD THEN............

cobra (author)Abominatus2008-02-07

does anybody even have a semi auto gun yet? I think mepians close.

ol987986 (author)cobra2009-10-19

extreme builder has its rubbish range tho, but im trying 2 make it better and i hope to post it someday, but it looks bleak.
soz 4 l8 reply:)

The Jamalam (author)cobra2008-06-17

I have nearly finished mine, it uses a chain!

The Jamalam (author)The Jamalam2008-06-17

and it is actually semi auto

masterchrisx3 (author)cobra2008-05-29

i have a good semi powerful one

happybirthday (author)cobra2008-03-07

knexagon

An Villain (author)2009-05-04

my v2 of this is awesome it can shoot through a bucket with a sharpened ammo

apcalculus (author)2009-04-07

Please put more instruction. It's hard to follow.

Dirtyboyy (author)2009-03-21

wtf ?

Knex Lego Maniac (author)2007-04-13

your gun looks solid the two handle design is nice and probly helps to stablize the gun while firing i catch myself holding the barrel of my gun to keep it stable and always thought of adding a handle or something anyway the gun looks to be a quality standard single shot weapon how do u like your gun? is there anything u would like to improve upon or just tell me whats cool about it that i may not understand just by looking at it i don't know if i have told u this yet but i have several projects i am working on currently im perfecting my sniper prototype i tested it out last weekend and i can assure u it is the most powerful gun i have ever built once complete the finished design should have no problem shooting over 300ft and accurately put rounds down range into small targets at over 100ft my first test shot was in a gym cause the weather suks around here and the gun shot clear across the gym and left a 1/4 inch hole in the spot where the bullet hit (this was all done w/ only 1 rubber band i was afraid to put another band on but i did and the results were twice as good the round flew across the entire gym very very quickly and accurately i have some minor design issues to finish up but overall the gun is in its final design phase nice gun design keep up the good work ps let me know what new designs or ideas u have

deawon2 (author)Knex Lego Maniac2008-08-08

hi killerk i've been waiting long to write you and i looked at your sniper i know it is a very powerful gun but i dont have enough pieces to build it i am always looking around the site for powerful guns but none of the ones i made shot through a carton box can u please design a gun with few parts that shoots trough i have made a special gun also its a two barreld block trigger with mag i also got a gun that is 2 yellow rods stuffed with yellow connectors the first and the last one stick up for the scope and it has a block trigger should i post one of these two

deawon2 (author)deawon22009-01-16

I know but i dint have much time

King_Banana (author)deawon22008-09-13

build radioactives spec 9 sniper

kingghaffari (author)deawon22008-08-09

Search DD-27 and make that. lol!

Come see my new AP3 (Assault Pistol 3). It has a 9 round mag and works very smoothly without jamming.

cobra (author)Knex Lego Maniac2008-02-07

is that the SRV1?

Knex Lego Maniac (author)cobra2008-02-08

actually this was a different prototype that i never ended up posting

did it hav the same system as the sr-v1? and if it didnt what type of sytem did it use?

oh god. Dont tell us whats next but finish your magnum in an instructable first then go to the sniper proto type. When you do have the guns ready for an instructable you want to finish it in a couple of weeks. Haveing people be redirected to your orange board to see pictures of your magnum dosent satisfy me . you should have it in fourums. just telling you that.

sry to dissapoint im not here to satisfy u, just incase i gave u that impression

nah. just a hint cause you have so many guns but no instructables

LOL

lolz

cobra (author)knex hater hater2008-02-07

what?

cant wait for teh sniper :)

Metal4God (author)Whaleman2007-09-13

how much longer you willn to wait

Whaleman (author)Metal4God2007-09-13

I don't care, as long as I am still alive, and it isn't a hoax

bruce911 (author)Whaleman2007-09-18

what isn't a hoax?The sniper?

About This Instructable

8,891views

10favorites

License:

More by Flie-Ing GOOse:F.G.S.A Flie-ing goose side armKnex Combat Pistol V1 with Rifle attatchmentsbreak action shot gun
Add instructable to: