Introduction: Floating Logo
This is my first 'ible And i want to devote this to the site...
This is about how to make your logo look interesting...
I have used leds to make the water glow on which the logo will float...
So I am going to start with some basic materials...
Step 1: Materials Required...
Here's A list of materials required...
- 13 transparent Plastic Glasses
- A pair of scissors
- Cello Tape
- 13 LEDs
- Some translucent plastic straws(color of your choice)
- Match box
- Wire (for connection)
- Lemon juice
After this start with these...
Step 2: Logo Choosing/Letter Making...
Take some straws, a cello tape and a scissor.
Take a straw and cut it with the help of the scissor according to the size of letters.
Cut a piece of cello tape and join the straws to form letters as shown.Similarly make
all the letters of logo.(eg:INSTRUCTABLES)
Step 5: Preparing the Glass...
Take Transparent Glasses and a scissor.
Open the scissor and pierce one end of the scissor
softly into the glass.
Now close the scissor and pierce it in the class while twisting the scissor
and pierce it till you get the hole of size of LED.
Similarly make holes in other 12 glasses.
Step 7: Fixing LEDs
Fix the LEDs in the glasses.
Take a candle and a matchstick, burn the candle and fill the gaps near LEDs with wax.
Similarly fill the gaps of other glasses.
Step 9: Connecting LEDs
Connect the LEDs parallel to each other.
Take the adapter,cut it's lead with the scissor and then peel off the wire from the ends.
Connect the adapter to the LEDs and plug in the adapter.
Step 12: Finishing.....
Now Fill the glasses with water And Add lime or lemon juice to it to make colloidal solution...
and float the letters which we made earlier...(I have taken photo it in two parts because it was not coming in one frame).
Now Switch on the leds....
And Admire the beauty of this project in DARK...
Plz Vote Us Here...
Make It Glow 2014
Thanks For Watching PLZ Vote.....