Picture of Floppy Disk Bag: Install Disk 2
Nigh on two years ago, I began working on my first floppy disk bag (second picture) and then on my first instructable. Within those two years, the bag has been blogged around the world, won an instructables.com contest and various art awards, been presented in various galleries and the Oregon Museum of Craft, and has even been featured on German public television.
More important than that, however, is that immediately after publishing the instructable, people began making their own bags, improving on my design, and posting suggestions for people interested in making their own. Thus is the nature of instructables.com.
I never revisit projects, I feel that instead I could be working on one of the many half finished projects encroaching on my living space; However, I needed a laptop bag, and have always wanted to incorporate into the original design the two best ideas posed by other bag makers:
- A canvas lining
- Using a binding material other than hard-to-find jump-rings

This rather long instructable features two sub-instructables:
- How to Tie A Square Knot
- How to Prevent Fraying in Cotton Webbing Without Glues

Please read through the instructable in its entirety before taking on this project because it has two different "things you will need" pages and an interlude about adhesives.
Add EL wire here: [http://www.instructables.com/id/Floppy_Disk_Bag_Retrofit_EL_Wire]

Step 1: What's wrong with the old bag?

Picture of What's wrong with the old bag?
As you can tell from the pictures, the old bag began to fall apart where the flap meets the back. When wearing the bag, bending over causes the bag to compress, over time this led to the jump rings tearing through the weak areas of the floppy disk.
For this new bag, since we aren't limited by the size of the jump rings, we can drill the holes further away from the edge of the disk, reducing the possibility of tearing.
1-40 of 87Next »
EtherPants6 years ago
Bah the image didn't attach
Picture 044.jpg

yours looks cool by the way

I am working on mine I have more black floppies than colored I will end up sharing pictures of it when I am done...

nerd74735 months ago

what glue did you use?

Ummm... Those aren't FLOPPY disks, but nice work anyway. How long did it take you to make your first one?

Actually, they are floppy disks. They get their name from the thin, magnetic "floppy" disk inside the casing. :)

Really? :) I'm sorry if I was incorrect, but I always thought since they were nicknamed "Floppy" and "Stiffy" disks that the two were always referred to in different ways. ^^

jjoyce ii1 year ago

I want one of these, but I'm not sure where to get that many floppy disks.

moonchylde2 years ago
I just saved about 500 floppies from a neighbor's trash tonight, though I wasn't sure what I was going to do with them. Now I know what all my geeky friends and family are getting for Christmas this year! Cheers!
yaaahhh!!!...I wish I can have a bag like that...
I think my favourite part of the new one is how clean and professional the final bag looks. If you used black zip ties, new black floppies (like yours), and similar hardware, it would be (in my opinion) a professional enough no-frills briefcase... Albeit way cooler and more original than your co-workers'!
Rabi-Chan4 years ago
Has anyone done a stress test with this bag? such as the total amount of weight that the bag can withstand? I'm wondering this because I'm a full time student and i carry a lot of books and a laptop so i wanted to see if the bag can handle my hectic semester.
crjeea4 years ago
Hmm... I think im going to make a floppy disk PC case... that is if i can find enough dead floppy disks (:
storygarvie5 years ago
I put the floppies in position on an old white towel,  then used an awl to punch through the towel, which held the hole-shape really well until I could get the ziptie through the hole and towel.  Plus I don't have a sewing machine so I didn't have to hem the towel.
storygarvie5 years ago
 I just rescued a whole mess of floppies destined for the trash bin at my work and I'm totally making this bag.  What do you think of using colored zip ties instead of twine?  I like the yellow on black contrast, but I don't think I have the patience to tie so many knots.
I built 2 versions of this bag. One the size mentioned above and another smaller one. I made both using small ZipTies and no fabric.

I had the same idea of using ZipTies with the fabric but was unsure how to proceed. Use a knife and cut small holes? Any suggestions?
imanalchemist (author)  ogmosic5 years ago
I would suggest using some sort of punch, a large needle, or a small hobby knife would work fine.
todddiskin5 years ago
Rather than the footman's loop, one might be able to weave the strap in such a manner that it would loop through the bag, supporting the bottom. I have a cardboard bag that is very similar in dimension to this bag and the strap is exposed, supporting the bottom of the bag, "weaves" into the bag on the side and then back out at the top. One could easily do this by having the strap support the bottom of the bag on the outside, weave it through the space between the disks on the bottom and the bottom disk on the side (make a slot through the canvas, of course), then allowing the strap to come out through the space between the bottom of the top disk on the side.

Since I had to buy new floppies I just used the box as a template although duct tape was my second choice since I had nothing at home to make a template. Another nice side effect is that my wooden breakfast plate now has cool holes in it ^.^
imanalchemist (author)  MoDYezariael5 years ago
that's the smartest thing I've ever heard. I never would have thought of that. thank you
azaana6 years ago
I used a old computer cable and removed the screws which secure it then used the holes in the floppys to secure it to my bag.
azaana6 years ago
i was making a jig but then realized it was to much effort when you can just use duct tape to hold them together, for an all the more simpler method
red-king6 years ago
I have a ton of floppy disks somewhere... once i find them this might be what happens to them.
EtherPants6 years ago
Just finished my own floppy bag after working on and off since winter break. I had fun gathering up the more colorful ones and am proud to say it has exactly 42 disks. The strap is a couple of belts from goodwill
Iridium76 years ago
That is a good instructable! my bag was actually based off the old bag but the holes farther apart but secured by zip ties.
Looks much better then the first and more flexy (or how every you spell that) nice job.
you would say flexible. ;D
imanalchemist (author)  mg0930mg6 years ago
would I?
Yes, at least I hope you would...
imanalchemist (author) 6 years ago
yes, yes you could.
BlankJebus6 years ago
couldn't you use a guitar strap for this? because most are still comfortable after wearing them for ling periods of time and they have the loops on the ends already.
This is the bag my Girlfriend and I made, we used cable ties because it's a lot quicker and less hassle. We got the discs, the canvas and bag strap from the local tip shop.
I love it, who says floppies are out of date? Next shall we try to do a CD purse?
i've done that. Not as good, because it was effing hard for me to get a good (and actually practical) pattern.
imanalchemist (author)  phant0m_sp00f3ra6 years ago
i'll upload em when i get to my Computer. Its strrongly based on duct tape and CD, more a proof of concept.
[quote]Floppy Disks: 42 disks are used in the bag, so in a box of 50 you get some to practice on.[/Quote]

your bag is certainly conspiring against us, but Don't panic!
hc926 years ago
are you ok with people making thses these and selling them?
imanalchemist (author)  hc926 years ago
Nope, it's licensed under a non-commercial share share-alike creative commons license. I would rather that it was available free to everyone.
kburesh6 years ago
is the sobo glue in the picture any good?
1-40 of 87Next »