Floppy Disk Pen Holder

Step 2 Drill the Holes

The floppy disks already have two holes that are perfectly positioned for our project. At the top next to the metal slider there are dimples on each side where you will drill holes in 4 of the floppy disk. These disks will make up our 4 sides.

For the bottom of our pen holder, the dimples are not quite where we need them so drill a hole above them at the corner.

Comments

[camelsamba]

Based on this, i thought I only needed to drill holes where those dimples are for the side pieces - two per disk. But from the next step, I now see that I need 4 holes on each. Back to the basement shop for me!