Picture of Floppy Disk Planter
Floppy disk planters are a great way to use old floppy disks that you may have lying around.  They are made simply from floppies glued together to form a cube and adding a liner on the inside.
Remove these adsRemove these ads by Signing Up

Step 1: Materials:

Picture of Materials:
  • Six floppy disks per planter
  • Plastic bottle or yogurt container (this will be the inside liner)
  • Plant
  • Gravel  (optional)
  • Activated charcoal (optional)


  • Glue
  • Duct tape
  • Scissors/knife/Dremel
  • Pencil
  • Clothespins/clips
  • Adhesive remover (if necessary)

Step 2: Prepare disks

Picture of Prepare disks
Gather together your floppy disks, you might want to check if there are any important files saved on them.  Mine where backup disks from a 386 that I had years ago. 

Remove the labels.  I found that the labels came off easily but the adhesive left behind proved to be more difficult, this is not surprising considering that the labels where probably affixed some time in the 90's.  Adhesive remover is useful here.

If you have floppies in different colours arrange them in an aesthetically pleasing way to form a cube.  I only had blues, greys and blacks and a couple of pretty green ones, so this is what I came up with. I suppose it would be possible to paint them too to make the planter more colourful.

Step 3: Glue disks to form a box

Picture of Glue disks to form a box
Apply glue to one edge of a disk and place against the edge of second disk perpendicularly forming a corner.   Repeat with the other disks creating a box.  Make sure that the corners are aligned and form ninety degree angles. Then glue on the bottom piece and allow to dry.

If you follow the way I glued the disks (see images below) the box will have a longer length than width.  This will allow the bottom and top pieces of the cube to fit better since floppy disks are not perfectly square. 

Step 4: Reinforce with duct tape

Picture of Reinforce with duct tape
I reinforced the inside edges with duct tape to ensure the cube holds together.  Take a strip of tape and fold it in half along the length and apply to each of the inside edges of the cube.  The glue is probably enough to hold the cube together, I am just being cautious.

aviansun1 year ago

Done! Thanks for the idea.

ChrysN (author)  aviansun1 year ago

Nice! Thanks for posting.

Jent135 years ago
I was just wondering what type of plant is that in the pictures? cause it look like a really cool viney one.
ChrysN (author)  Jent135 years ago
Yes, I really like it, though I picked up at a grocery store for $1.99, the tag just said it was tropical but didn't give it's name.
M.C. Langer5 years ago
I love your planters, Chrys! You have my vote!!!!
ChrysN (author)  M.C. Langer5 years ago
Thanks (I voted for yours too)!
Ivriniel5 years ago
These would also make cute desktop containers for pens and whatnot. 
ChefZombie5 years ago
I love the idea, but how do you keep the pot from overflowing? I don't remember catching that part in the instructable.
ChrysN (author)  ChefZombie5 years ago
Do you mean drainage.  I didn't add drainage holes in these ones but I think I will in future ones.  I would add holes in the bottom of the liner and put a saucer underneath.  For these I will have to be careful not to over water them.
Kryptonite5 years ago
Why has it taken me this long to find this!?!

5*, subbed!
ChrysN (author)  Kryptonite5 years ago
Thanks for the rating + sub!
DinaMarch5 years ago
 awesome! i can use it for my school project. thanks!!
that is so cool but i dont have any; dont u get those at office depot?? :)
ChrysN (author)  chocolate24105 years ago
You can probably still get them at computer stores though it seems a waste to buy them, can you ask friends or family is they have any old ones lying around.
Creativeman5 years ago
Who'd ever thought?   ChrysN, that's who! Great stuff, Chrys...good luck in the contest. Cman
ChrysN (author)  Creativeman5 years ago
Thanks Cman, you always say such nice things!
How well does the Weldbond adhere to the floppies?
ChrysN (author)  Tool Using Animal5 years ago
Weldbond adheres really well.  A glue gun would probably work too, but the one I have is really lousy.
Ninzerbean5 years ago
 Wonderful wonderful wonderful!
ChrysN (author)  Ninzerbean5 years ago
reactif85 years ago
That's lovely.
I always like to try and re-use all those old things that end up being useless for anything ever again.

Well, almost.