Introduction: Floppy Frame

When tidying up the garage a found this old Floppy Disk and the first thougt was to throw it away.

But I always have problems to throw things away, so I need to find a place for it.

The Ikea Ribba frame was the solution. Now it's hanging on the wall with the family pictures and my wife didn't kill me for this.

Step 1: The Build

You need a Ikea Ribba Frame and a 5 1/4 Floppy Disk

Cardboard and Hot Glue.

Open the Frame and glue a piece of white cardboard behind the white frame.

from an old cardboard box cut 4 small pieces +- 40mm x 20mm and fold them in the middle

With hot glue fix them on the white frame and glue the Foppy Disk on the 4 supports.

Put all together "et voila", a cool Retro Deco Floppy Frame

Comments

author
UnclTodd (author)2016-04-28

An honorable display mount for an important piece of history! I am already planning a stacked-array framed display of my favourite version of Windows, Win 3.11 for Workgroups! (3 bright-blue floppies) Thank you for stepping over the edge.

About This Instructable

212views

2favorites

License:

Bio: Building useless things since 1980
More by awall99:Arduino Data Glasses for My Multimeter Electric Paper PlanePi Zero IOT Led Matrix Beamer- A Message on the Wall
Add instructable to: