Introduction: Flower Manager With Arduino, 5110 and 3 Sensors

Hi guys! Today we are going to make a flowerpot manager.

Now, we want to if a lot of sunshine, water or temperature on flower, this device report to me.

I know it won't be easy but we will be successful.

Let's start..

PLEASE FOLLOW ME AND VOTE MY PROJECTS FOR MORE USEFUL PROJECTS. THANK YOU..:)

Step 1: What Will We Need?

Picture of What Will We Need?

We will use this parts;

1- Arduino Nano

2- 3.7v battery

3- 5v Battery Charger

4- Moisture Sensor

5- LM35 Temperature Sensor

6- LD7- Mini Breadboard;

Step 2: Tests and Prototype

Picture of Tests and Prototype

Today also we learn how we read 3 sensors and write to 5110 screen?

We used 3 'analog Pin' in same time and we can show 3 of them in same time on the screen networking.

Step 3: Cardboards

Picture of Cardboards

You can change the shape of cardboards.

Step 4: Connections on Fritzing

Picture of Connections on Fritzing

Also you can connect a buzzer. We think connect a buzzer but it will be very noisy.

We connected to 5v pin battery.

You can charge this device with Android Phone Charger. And it can work when its working.

Step 5: Code Link;

Picture of Code Link;

You can get this works code from this link;

https://drive.google.com/open?id=0B6EUM2JQFzOhWW1o...

Step 6: Final;

Picture of Final;

We should immerse the needle to soil. And turn to sunshine the screen. We will upgrade this device as soon as possible. We will add new sensors and new futures.

Please Follow Me, Share My Projects And Vote My Projects..:)

I am waiting for your comments..:)

Thank you..:)

Comments

tomatoskins (author)2017-04-07

Very cool project! Thanks for sharing and welcome to the community!

ensarlevent (author)tomatoskins2017-04-07

Thank you..:)

About This Instructable

1,832views

29favorites

License:

Bio: BIG THINKS, BIG THINGS! FOLLOW US ON YOUTUBE: https://www.youtube.com/channel/UCODcdPwhBerlNMSHB_ATEow
More by ensarlevent:SMART MINI GREENHOUSEBayern München Spinning WhellTURN ON LIGHTS WITH RFID CARD
Add instructable to: