With Instructables you can share what you make with the world, and tap into an ever-growing community of creative experts.
Take this cupcake step by step and you will be sure to have a beautiful outcome. Take your time and use a consitent technique all of the way ...
Use a number 67 leaf tube and make a half circle scallop around the cupcake.
Use a half circle motion to create the green scallop. If you cant make this pattern the goal is to cover the edge of the cupcake with green ...
Continue the border around the cupcake
The skinny point of the rose tip is pointing downward. This is the tip that you are going to use to make the pedals. I wanted to show ...
Use the 104 rose tip and start with the small narrow point of the tip closest to the cupcake and start from the center of the cupcake and ...
Hold the tube with your palm facing up and the tip slanted to the side. Use the skinny part of the tip closest to the cupcake.
Practice the motion on the side before starting on the cupcake. Using almost a skinny loop motion to create the pedals.
Do another layer of pedals on the top of the first layer.
Using a number 7 round tip make a small dot in the center of the cupcake
Using a number 4 round tip make lines all around the dot in the middle of the cupcake. Use your imagination and go wild. You can use whatever ...
using a number 4 round tip put highlights of yellow on top the gold for a nice contrast.
Using a number 4 round tip put orange dots in the center of cupcake
Use a round tip to make gold dots over the orange dots for a beautiful highlight to the center of the cupcake.
Number 104 rose tip and number 67 leaf tip.
Join 2 million + to receive instant DIY inspiration in your inbox.
© 2016 Autodesk, Inc.