Instructables

Flying Saucer pet house

Featured

Step 4: More marking out, and cutting

Picture of More marking out, and cutting
P3250225.JPG
P3250226.JPG
P3250227.JPG
Next I drew circles with a scrap piece of pipe where the legs go, I didn't have the right size hole saw so i cut the holes with a jig saw. To cut the door opening, I first drill a small hole in each corner to let the blade pass through and then cut where the hinge will fit.
 
Remove these adsRemove these ads by Signing Up
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!