Print PDF
Favorite
Email
Step 4Glue the foam together
Mix the Micro into the epoxy in a 1:1 ratio and use this to glue down the sheets of foam together. You may need to use weights to hold the sheets together as it dries.
Mix 2 parts volume of micro with 1 part epoxy and thinly spread this over the foam. This will fill any perforations in the foam and provide a good surface for the glass to bond to.
Mix 3+ parts volume of micro with 1 part epoxy and use this thicker mixture to fill around the edges where the lower sheet of foam meets the upper sheet. This will provide a rounded 'fillet' transition for the glass to bond to rather than sharp corners.
Mix 2 parts volume of micro with 1 part epoxy and thinly spread this over the foam. This will fill any perforations in the foam and provide a good surface for the glass to bond to.
Mix 3+ parts volume of micro with 1 part epoxy and use this thicker mixture to fill around the edges where the lower sheet of foam meets the upper sheet. This will provide a rounded 'fillet' transition for the glass to bond to rather than sharp corners.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
