...and when there is no wind outside, here's a flight down the sidewalk:
It is reccomended that first timers start with the tumblewing walkalong glider design as it is much simpler to build and easier to fly because it is slower.
Step 1: Cut out the Pattern Outline of the Wings
Step 2: Cut out Piece of Raft-R-Mate Material
The Raft-R-Mate product does not come in nice flat sheets and must be cut and thermoformed. The pink foam is cut so all bends are parallel to each other. This makes thermoforming the material into a flat sheet easier. Here's how to cut the foam: