Introduction: Foam Core Light/lamp
-11x17 foam core sheets (2)
-Single light or douple light socket
Step 1: Cut Out Strips
I cut out 12 strips of foam 6 being 17 inches and 6 being 8 inches.
I then connected each piece with 2 small strips of foam core that was glue to each side.
Step 2: Holes
Once the pieces have been assembled holes need to be cut to allow the wired and the socket to fit for either the single of double use.
Step 3: Uses
The double light can be used to hang from the ceiling and the single a desk lamp.