With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
I absolutely love outdoor summer games, but since its winter in Seattle, I wanted to bring one of my favorite games indoors and make it a more apartme...
There are a few ways that you can customize this so some of the materials are marked as optional. I used hot glue to make the bean bags because it is...
The first step is cutting out the Top piece for the board. I settled on a 10" by 5" board because it seemed like a good sized target to aim for at the...
The next step is cutting out the Back of the board. 4" tall seemed to produce a good slope. Since the width of the Top is 5", the piece you cut out sh...
I used a cup that had a decent sized circle (2.75" diameter) to trace onto the Top piece of the foamboard. I centered it width wise and placed it in t...
At this point you will want to plug in your hot glue gun and let it warm up to use in the next step. For this step, you will need two right-angle tr...
The first pieces to be glued together will be the Back piece and each of the two Side pieces.Make sure you have the 5" width of the Back piece oriente...
This is the hardest part of the board assembly (and the whole project.) You will need to place hot glue on the edges of the Top piece and tension-fit ...
It is pretty hard to align the edges perfectly, so if you find that they are slightly uneven in some spots (like the way the Side pieces protrude abov...
I needed a bit of a break from foam building, and since my Hot Glue Gun was already warmed up, I decided to move on to the bean bags before finishing ...
Take one square of felt and place thin lines of hot glue around 3 of the 4 sides. Again, try to keep the side with markings (if there are any visible)...
I wanted to put a manilla folder layer on the top and back to make sure I had the smoothest work surface to deal with. Simply cut out two pieces of ma...
Because the board will need to stay in one place even with bean bags being thrown at it, you will need to add some heft that wood has but foamboard la...
Now it is time to begin decorating and finishing the edges of the playing board. I love the look of masking tape ( I might be weird), so I wanted to s...
Now you are ready to cut and place the top decorative piece of paper. You can choose any design you want for this part. I didn't want anything too bus...
At this point you can add whatever decorations you would like to customize your playing board. I wanted to outline the inside of the center hole in b...
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »