With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
Ohio Mike introduces this project by video. If you do Twitter... Please follow me there too http://twitter...
Materials needed for the Window Solar Panel: 1. Screen frame Material 2. Screen framing Corners 3. Aluminum flashing 4. Black Cinef...
So that your cuts make for a square solar panel... tape together four lengths of screen frame. After cutting to size, insert the ...
Use your hair dryer to heat-up the glue holding the sticker on. (makes removal easy of any stickers) Measure the roll of roof fla...
Remove foil from protective box. Use the aluminum flashing you already cut to size for sizing the foil. Use utility ...
Align the flashing to the frame. Start the taping process for the flashing. Tape each corner as shown. A...
Align the foil to the opposite side of the first panel with the flashing back. Center the foil and tape the center of one end. ...
Tape the film down on a floor or table to have it laying flat. Tape, pulling each corner until you get the rolls out of the fil...
Drill each corner with a 3/32 bit for starter holes. Start the eye hooks by hand. Carefully run the eye hooks do...
Remove foil from protective box.
Use the aluminum flashing you already cut to size for sizing the foil.
Use utility knife to cut foil.
Also cut to lenght.
Now roll the foil up for later use.
...
Remove these ads by
Signing Up
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »
http://blog.imehrle.com/2011/02/10/solar-heating-made-easy----very-easy.aspx