Print PDF
Favorite
Email
Step 3The Wire Hanger
This step depends on how high up your toilet is. Remember that this project can be done on any type of toilet. I use a flushometer, but it will work on flush handles as well. Find the approximate distance between the floor and the handle and, using pliers, keep bending the hanger back and forth until the piece is straight and the excess has been taken off.
Mine was approximately 22 inches. It doesnt have to be exact as you can always bend it a bit later on. Also, it doesn't have to be perfectly straight either, as once the paper towel rolls are over it, you won't see the hanger at all.
Mine was approximately 22 inches. It doesnt have to be exact as you can always bend it a bit later on. Also, it doesn't have to be perfectly straight either, as once the paper towel rolls are over it, you won't see the hanger at all.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
