Instructables

Forging Links Master Sword - Twilight Princess version

Featured
Okay so it's not literally forging because it's made from wood, but it sounds better then making.
I've been meaning to write this Instructable for almost a year after completing my Master Sword back in May 2009, but things have always seemed to get in the way until now.

I've always been a great fan of all of the Zelda games and I knew it was only time before I attempted to make a replica from one of the games.

So in this tutorial I will be showing you the steps I took to produce my Master Sword. I've gone for the sword from Twilight Princess as it's the most detailed Master Sword to date and it looks the best.

Update 27th May 2011
I've begun work on the Hylian Shield. You can follow my progress on my website http://www.jonsprojects.co.uk
I will be creating an Instructable when it's complete.
 
Remove these adsRemove these ads by Signing Up

Step 1: Tools and materials

Picture of Tools and materials
Tools
Sand paper
Sanding blocks
Files and rasps
Pencils
Set square
Coping saw
Drill with various bits
Craft knife
Dremel (rotary tool) with various bits
Clamps (and lots of them)

Materials
Wood glue
Wood filler
Pine strip wood
Basswood
String
Spray paint
Enamel paint


Step 2: Design

Picture of Design
So the first step in any good project has to be design.
After lots and lots of research I came up with the design I wanted to go for. Using lots of reference pics I drew a scale picture.
Using the attached picture in this step you can see the dimensions I used for each part.

After a few comments I've found the original photo of the plans, tidied them up a bit and uploaded them to some of my web space. Links below.
Master_Sword_Plans.jpg
1-40 of 150Next »
It's very good u should make a shieth tutorial
gammerguy13 days ago

Man this is amazing!

Sargment25 days ago

He man are you planing on adding a tutorial on how you did the scabbard? because It would be really helpful!

mrdanishman29 days ago
I love the detailing. Could you by any chance, give me the Imperial measurement for the wood?
the_sloot1 month ago
How did you make the scabbard?
samct982 months ago

I can't read the deminsions on the drawing :/

Aiden263 months ago

How come you didn't add the winged hand guard to the blade piece? When you glued on 2 other handles/hand guards to the top and bottom there was an empty space in the middle. Why did you make that separate from the blade?

mhorst4 months ago

How much to sell it for?

kbodie15 months ago

I'm going to be using this tutorial to make myself a sword for next years Anime Central in Chicago, but I'm wondering what you used the basswood for. Its one of the materials listed and i didn't see it used. also what was the thickness of string that you used? Thanks

Jonny1983 (author)  kbodie15 months ago

The basswood was used for the Triforce detailing on the blade.

The string was probably about 2mm thick.

nqtronix made it!6 months ago

I proudly present you my version. I even made the matching hyrule shield.

Your instructions and espscially the dimensions helped me a lot, thank you! Mine might not be as perfekt as yours, but I'm fully satisfied with the outcome. You can't expect more when you rush through the whole process in only 6 days, I had to get my costume ready for use. :P Unfortunatly I had to carry it while the paint wasn't fully dried, so some blue of the guard went off.

Origionally I planed to paint the blade and handle as well, but I thought it would be a shame to cover the nice acorn blade with any paint. I left the handle blank for a better feeling while holding it. I might add a pommel as soon as I have some spare time, but untill then it stays as it is. Appart form that all changes are minimal.

Both, the sword and the shield are base on an arwork from the official Hyrule Historia. For the shield I roughly trace out the pattern on paper by hand (upscaled by ~10x), transfered the individual pieces on wood with different thicknes, cut the parts out and finished them with a dremel, files and sandpaper. The inner parts are coated with 2-3 layers of primer, than either a layer of silver paint or two layers of acrylic paint with a gloss finish. The outer ring was first glued to the board in order to sand level the edge. Primer was applied over the whole board exept the places where the other pieces went later. I masked the ring to paint the inner parts blue, later I did it other way around for the silver. Unfortunatly the blue wasn't completly dry so some stuck at the mask. The shield can be hold by two stripes of artificial leather hot glued to the back (nothing fancy, so no picture).

The only thing left to say is that ist was definitly worth all the efforts I put in it, it looks and feels amazing to hold it.

Today the Master Sword, tomorrow Hyrule :D

member.Jonny1983 Forging-Links-Master-Sword-Twilight-Princess-ver 01.1.jpgmember.Jonny1983 Forging-Links-Master-Sword-Twilight-Princess-ver 01.2.jpgmember.Jonny1983 Forging-Links-Master-Sword-Twilight-Princess-ver 01.3.jpgmember.Jonny1983 Forging-Links-Master-Sword-Twilight-Princess-ver 01.4.jpg
azayas111 months ago
Hi man, awesome job. I don't know if you're still answering this but I have a related question. All I could find in town was pine stripes with 1.4 cm. thickness. Which would be the best way to take it down to 1 cm. like yours? Maybe saw it then sand it? It's 4 mm. not much margin there.
Thanks! The tutorial is amazing!
Bazzatron azayas16 months ago

Run it through a thickness plane - or plane it by hand.

In all honesty though - it would be easier to find the right size board or find two 0.5cm boards and laminate them together with wood (PVA) glue.

oops - just noticed this was 4 months old!

Jake15627 months ago
I started making one but the blade was too thick for the handle so it wouldn't stick, what do I do
Jonny1983 (author)  Jake15627 months ago
Would be good to see a picture of what you mean.

My blade and handle were made from one piece. The handle was then built up so I never encountered this issue.
Roen1067 months ago

I'm curious. Do you actually mean 5mm board? That seems incredibly
thin. Could it be that you meant 5 cm board, with a total width of 10
cm?

Fantastic job by the way. Making one myself, which is why I ask about the thickness. You wouldn't happen to have the dimensions (interior and exterior) for the sheath would you?

Jonny1983 (author)  Roen1067 months ago

Think you might be mixing up thickness with width.

If it was a 5cm thick board you'd end up with a fence post as a the blade.

natedoddle8 months ago
If you make the shield then you should do 3 layers. It would go cardboard,wood,cardboard
natedoddle8 months ago
I meant to say I'm
natedoddle8 months ago
Sorry l wrote LM
natedoddle8 months ago
I think LM. Just gonna use ribbon
natedoddle8 months ago
Im gonna try making one my self
Jonny1983 (author)  natedoddle8 months ago

Go for it!

natedoddle8 months ago
What did you use for the stripes on the handle?:D
Jonny1983 (author)  natedoddle8 months ago
The stripes are made from cut up tennis racket strapping.
DaveNJ11 months ago
Outstanding job!
patbking11 months ago
When will you create instructions for the scabbard and shield
sorry I accidentally posted my last comment 3 times
I know this might sound like a hard long project but can you make instructions on how to make the sword out of metal please
I know this might sound like a hard long project but can you make instructions on how to make the sword out of metal please
I know this might sound like a hard long project but can you make instructions on how to make the sword out of metal please
what color paints did you use for the sword?
Make an instructable for the scabbard too!!!
Dude! That's SICK!!!!!
how much do they cost?
You could easily make replicas of your sword without lifting a finger. If people were really interested you should look into having them machined. They can make it out of any material you wanted, resin, plastic, metal, etc. Way less than $60 a piece.
Jonny1983 (author)  burning_empire2 years ago
What sort of company would I need to find to do that? I'll see if I can find one in the UK.
I don't know anything about companies that do that, but if you still have the sword you could use it to make a mold and then use the mold to make copies. They would still have to be painted but that could be a pretty easy way to duplicate and sell them.
Actually the UK is the central hub for effects shops, and movie companies that fabricate props and practical effects.

You can look up local CNC machine shops.
1-40 of 150Next »