Print PDF
Favorite
Email
Step 7Legs!
This part is pretty easy after messing with all those cushions. Make two more 3/4" dowels that are 20", and one 1/2" dowel that is 25-1/2". Drill a half-inch hole in the dead center of the 3/4" dowels. These will be the leg braces.
Assemble the legs with their feet and intermediate pegs, glue, and let set up. Leave pegs out of the 3/4" holes in the feet.
Slather on the glue, and put the sets of legs in with their brace, one at a time. Once one set is one, fit in the longitudinal brace into the 1/2" holes in the centers of 3/4" dowels, and put on the other set of legs. Clamp.
Assemble the legs with their feet and intermediate pegs, glue, and let set up. Leave pegs out of the 3/4" holes in the feet.
Slather on the glue, and put the sets of legs in with their brace, one at a time. Once one set is one, fit in the longitudinal brace into the 1/2" holes in the centers of 3/4" dowels, and put on the other set of legs. Clamp.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
