Print PDF
Favorite
Email
Step 7Sew in the USB cable.
Clip off the end of the USB cable that will not fit in your computer.
Cut a small hole in the side of the bear and pass the cable through about 3" or 4". Once passed through, knot the cable inside the bear so that it can't pass through the hole. You can maybe add a drop of hot glue to this for better results.
Now sew the knot to the bear. Again, it does not matter how, just make sure it is attached well.
Cut a small hole in the side of the bear and pass the cable through about 3" or 4". Once passed through, knot the cable inside the bear so that it can't pass through the hole. You can maybe add a drop of hot glue to this for better results.
Now sew the knot to the bear. Again, it does not matter how, just make sure it is attached well.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
