Print PDF
Favorite
Email
Step 9Attach the red head knobs.
If the potentiometer has a knob, cut off all of the original knob but the part that couples the shaft. See if the coupling fits into the red knob (see secondary picture below).
If it does, glue it in place. And then place the new knob construction onto the potentiometer shaft.
If it does not, fill the inside of the knob with hot glue and glue the red knob onto the potentiometer shaft. Be careful to line it up straight and not get glue on the bear.
If it does, glue it in place. And then place the new knob construction onto the potentiometer shaft.
If it does not, fill the inside of the knob with hot glue and glue the red knob onto the potentiometer shaft. Be careful to line it up straight and not get glue on the bear.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
