Introduction: LED Mau5 Head: Deadmau5 Head Replica

Picture of LED Mau5 Head: Deadmau5 Head Replica

After working on and off for nearly 4 years, this project is now finished. Upon discovering Deadmau5; the stage name of Joel Zimmerman, I had always toyed with the idea of re-creating the LED mau5 head that he wears during his shows. After some research, I began planning how it would all go together. The lights are a chain of individually addressable led pixels that were glued in place with hot-melt glue and a mix of custom led holders, some of which I 3D printed and the rest made by Shapeways 3d printing service.

More information and projects can be found on my site here !!!

Comments

TheGhastlyGuy (author)2016-06-24

Damn dude that's really cool. Nice job. I've made one with lights before too but this one blows mine out of the water.

About This Instructable

1,777views

11favorites

License:

Bio: I make things because its fun and I like the challenge.
More by eXtremeSomething:LED Mau5 Head: Deadmau5 Head ReplicaArduslide: Arduino Camera SliderThe Templar's Visage: A FULL-COLOR LED DJ MASK
Add instructable to: