Instructables
loading
loading

DIY Flash Diffuser with Hundreds of FREE Color Filters

FeaturedContest Winner

Step 6: Insert the gels

Picture of insert the gels
Insert the gels, try to get them as far from the flash as possible as some colors may warp under the heat of the flash
 
Remove these adsRemove these ads by Signing Up
I'm having a little trouble understanding this step is the gel on the inside or outside of the film cannister. Thanks so much for putting this up though. It has saved me a whole lot of money.
it goes inside.. thats why he cut the arc out in the lid... makes it so you can slide the gels in and out easily