Print PDF
Favorite
Email
Step 4Mounting Rack
This step is highly dependent on your mounting location.
In the event of a top shelf, it's easy; in other more unique mounting locations, you may need to mount the racks onto a thin board and then, in turn, fasten the board to your mounting location.
1) Measure the spacing and location of your hangers.
2) Mark drill spots. (Pic 1)
3) Drill holes. (Pic 1)
4) Insert rear support rod & bend to secure. (Pic 1)
5) Repeat for all rear rods (Pic 2) & then all forward rods.
Now you have hanging glass racks.
In the event of a top shelf, it's easy; in other more unique mounting locations, you may need to mount the racks onto a thin board and then, in turn, fasten the board to your mounting location.
1) Measure the spacing and location of your hangers.
2) Mark drill spots. (Pic 1)
3) Drill holes. (Pic 1)
4) Insert rear support rod & bend to secure. (Pic 1)
5) Repeat for all rear rods (Pic 2) & then all forward rods.
Now you have hanging glass racks.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
