Print PDF
Favorite
Email
Step 3Make Wire Attachment Points
Grasp the wire at the very end with the pliers and bend the wire around the jaws of the pliers. Then move the pliers to the other end of the loop and straighten the tail end.
Move down about 7/8" (2.1cm) from the end of the hook and bend another hook using a similar technique. Then move down the same amount and make another hook.
If you are only bending two wires, just make two hooks about 1.5" apart.
Move down about 7/8" (2.1cm) from the end of the hook and bend another hook using a similar technique. Then move down the same amount and make another hook.
If you are only bending two wires, just make two hooks about 1.5" apart.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
