Print PDF
Favorite
Email
Step 2Prep Box
1. Tear out foam inside the box
2. Print template (the PDF)
3. Cut out template
4. Center template on box (4 cm from the left and right side, 3.2 cm from the top and bottom)
5. Tape template to box (the long flat side of the template is the front)
6. Cut out hole
7. Cut out small hole in the center of the bottom edge of the back side of the box for the USB cable
2. Print template (the PDF)
3. Cut out template
4. Center template on box (4 cm from the left and right side, 3.2 cm from the top and bottom)
5. Tape template to box (the long flat side of the template is the front)
6. Cut out hole
7. Cut out small hole in the center of the bottom edge of the back side of the box for the USB cable
template.pdf10 KB| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
