Print PDF
Favorite
Email
Step 2Prep the Foundation
Before we can get started we need to prepare the pallet by countersinking all of the nail heads.
1. Set your pallet on the saw horses.
2. Use your hammer and pound any nails flush with the wood.
3. Look for any stray nails sticking out and either pound them down or cut them off
4. Trim off any of the board edges that are not flush on the sides or corners, so no odd boards are sticking out. I used my circular saw for this.
5. Check each board to see if they need anymore fasteners installed to keep the pallet ridged.
Go to the next step
1. Set your pallet on the saw horses.
2. Use your hammer and pound any nails flush with the wood.
3. Look for any stray nails sticking out and either pound them down or cut them off
4. Trim off any of the board edges that are not flush on the sides or corners, so no odd boards are sticking out. I used my circular saw for this.
5. Check each board to see if they need anymore fasteners installed to keep the pallet ridged.
Go to the next step
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
