Print PDF
Favorite
Email
How to make an effective fruit picker in 15-20 minutes at no cost...
Requirements:-
1. Long straightish stick
2. Means to remove excess twigs from the stick (hands, secateurs, saw...)
3. Hammer, two nails, and optional washers
4. Tin can (larger variety where possible!), optional material to pad the can.
Requirements:-
1. Long straightish stick
2. Means to remove excess twigs from the stick (hands, secateurs, saw...)
3. Hammer, two nails, and optional washers
4. Tin can (larger variety where possible!), optional material to pad the can.
Remove these ads by
Signing UpStep 1Make Your Pole
Find a long straightish stick and trim off any side bits
You can use hands to break them off, secateurs, or a saw to cut them off.
You shouid end up with something like in the picture... (you'll probably want to remove the unused branch that's still on this stick)
You can use hands to break them off, secateurs, or a saw to cut them off.
You shouid end up with something like in the picture... (you'll probably want to remove the unused branch that's still on this stick)
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
