Print PDF
Favorite
Email
Step 7Mods.
I think you can basically understand how to do these from the pictures.
What I'd do if I were you is I'd just take the entire front and back end off of the gun but leave the entire barrel intact. Sorry if the notes and descriptions below are so long.
1.)This is the NEW version! It's really big, and beefy, which in this case is better because this thing has to withstand a lot of pressure from what used to be 19, but what is now 20 rubberbands. All the mods include: one more "barrel," a newly designed front end w/ beefier supports, outer and inner supports from the front of the gun to the end of the barrel, stronger butt-to-barrel-connections, a newly designed butt w/ added comfort and strength, a newly designed cranking system w/ a new light-weight spindle, more stable spindle supports, a sturdier crank, and a new "strap centering device." And the coolest one, a foldable turret stand!
2.)The very front.
3 & 4.)Inside the front end.
5 & 6.)Bottom of the front end.
7.)Side view of a section of the barrel showing how the outer and inner barrel supports are connected.
8.)Bottom view of the same section shown in pic #7 showing a little more of how the outer and inner barrel supports are connected.
9.)The new back end.
10.)A close-up view of the NEW light-weight spindle and strap centering device.
11.)The NEW butt w/ added comfort and strength.
12.)The NEW foldable turret stand.
13.)Folded.
14.)Close-up view of the top of turret stand.
15 & 16.)Close up view of the folding mechanism at the top.
17.)The folding device on the bottom.
18 & 19.)This is how you connect the turret stand.
What I'd do if I were you is I'd just take the entire front and back end off of the gun but leave the entire barrel intact. Sorry if the notes and descriptions below are so long.
1.)This is the NEW version! It's really big, and beefy, which in this case is better because this thing has to withstand a lot of pressure from what used to be 19, but what is now 20 rubberbands. All the mods include: one more "barrel," a newly designed front end w/ beefier supports, outer and inner supports from the front of the gun to the end of the barrel, stronger butt-to-barrel-connections, a newly designed butt w/ added comfort and strength, a newly designed cranking system w/ a new light-weight spindle, more stable spindle supports, a sturdier crank, and a new "strap centering device." And the coolest one, a foldable turret stand!
2.)The very front.
3 & 4.)Inside the front end.
5 & 6.)Bottom of the front end.
7.)Side view of a section of the barrel showing how the outer and inner barrel supports are connected.
8.)Bottom view of the same section shown in pic #7 showing a little more of how the outer and inner barrel supports are connected.
9.)The new back end.
10.)A close-up view of the NEW light-weight spindle and strap centering device.
11.)The NEW butt w/ added comfort and strength.
12.)The NEW foldable turret stand.
13.)Folded.
14.)Close-up view of the top of turret stand.
15 & 16.)Close up view of the folding mechanism at the top.
17.)The folding device on the bottom.
18 & 19.)This is how you connect the turret stand.
| « Previous Step | Download PDFView All Steps | Next Step » |
1
comment
|
Add Comment
|
Dec 13, 2007. 11:56 PMThe N3rD
says:
I still do'nt get it. how does it load and shoot? Looks very cool!
Reply
 |
Add Comment
|
