Introduction: Full Metal Alchemist Barry the Butcher Duct Tape Cleaver
This is for all of the Full Metal Buffs out there and anyone who wants to make a cleaver or an axe for holloween now im going to describe the easy one but the photos are from my hard to make one but the consept is the same and the one i discribe is so easy.
Step 1: Stuff You Will Need/and First Step
So what you will need is:
#duct tape some brown some silver/chrome
#cardboard lots of cardboard
#paper towel tube
# im going to update this every once in awhile for this is all you need for now one you need
Step 2: Cut Stuff Up
ok take a pretty good size of cardboard i used a 13 inches tall 10 inches wide half way out as in from left to right cut a curve this is optional check the first pic then cut two slitts in the tube each on one end one on the right and one on the left then have a piece of thesilver tape ready put the blade/big piece of cardboard in the two slitts to create the cleaver then tape it like in the second pic
wrap it like you've never wrapped before find your special technique i just wrapped one huge piece of duct tape over it in my easy less than five minute one look at the photo for the one i used many pieces of tape you can also wrap the handle
THERE IS NO STEP FOUR GTLITCHES GO TO THE STORE BUY MANY DUCT TAPES OF THE SCOTCH VERITY
We have a be nice policy.
Please be positive and constructive.