Remove these ads by
Flag this comment as:
Not NiceInappropriateSpam
3 Simple Ways to Share What You Make
With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
Create on the go:
With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
Furry Elephant is an introductory-level robot project that aims to introduce robotics to people in a more familiar and appealing way. The robot in...
Brainstorm and sketch out the look you would like to have for your robot; finalize the types of interaction that your robot will have Here are the li...
• Using this template, laser-cut the body using either wood or cardboard • Press-fit all the side pieces together, if you do not have the indicated th...
Ears - cut out 4 ear pieces using felt, you can find the template here. Glue 1 Popsicle stick between two felt pieces. Nose - cut out 2 nose pieces us...
• Create a pressure sensor using Scotch tape, 2 wires, and 4 layers of Velostat. • Tear out two pieces of tape, place the conductive part of the wire ...
When you squeeze the elephant's tongue, he will start to sing a song. Attach the speaker output to the Arduino. Use this code to test whether the outp...
• Create a capacitive sensor by tape a piece of copper tape on the top to the elephant. • Solder a piece of wire onto the copper • Attach the sensor t...
When the hand touches the capacitive sensors, the eyes of the elephant will light up
When the hand touches the capacitive sensors, it will activate the motor that will "wiggle" the elephants' ears. http://arduino.cc/playground/Learnin...
10 k resistor http://www.arduino.cc/playground/Learning/PhotoResistor
The entire coding are written based on
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »