Print PDF
Favorite
Email
Step 9Cleaning up seams
This might seem out of order, but I wish I had done each seam as I assembled the jacket.
In the photo below, you can see how the seam where the hood attaches to the jacket looks very sharp. It is, my son actually screamed when I tried the coat on him at this point because it was stabbing him.
To deal with this, cut releases almost to the edge of the fused seam.
Fold the seam allowance up into the hood and carefully fuse it in place. (I actually folded it down and realized it would have been much easier going up with less releases required.)
In the photo below, you can see how the seam where the hood attaches to the jacket looks very sharp. It is, my son actually screamed when I tried the coat on him at this point because it was stabbing him.
To deal with this, cut releases almost to the edge of the fused seam.
Fold the seam allowance up into the hood and carefully fuse it in place. (I actually folded it down and realized it would have been much easier going up with less releases required.)
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
